MODULE ASSEMBLY,JET

Description

{"description":" This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS. All of the following information is approximate and may be altered in the actual solicitation. Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions. DLA Land and Maritime anticipates issuing a solicitation in the near future for approximately 320 EACH of NSN 1720-012204591 \n\n Item will be purchased IAW the following: \nMODULE ASSEMBLY, JET \nALRE CAI \nRC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) \n\n \nRP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT \n\n \nCertificate of Quality Compliance (CoQC) Contract Data Requirements \nLists (CDRLs), DD Form 1423s, apply to this procurement. Review the \nTechnical Data Package (TDP) for additional information. If \nCDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they \ncan also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND \nQUALITY REQUIREMENTS FOUND ON THE WEB AT: \n http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx \n\n \nRA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS \n(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE \nDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB \nAT: \n\n http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx \n\n FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE \nSOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE \nACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE \nAPPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON \nREVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. \n\n The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, \napply to this procurement. Review the Technical Data Package (TDP) for \nadditional information. \n-First Article Testing Report -Production Test and Inspection Report \n-Certificate of Quality Compliance \nRQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL \nREQUEST FOR VARIANCE (DEVIATION OR WAIVER) \n\n \nRQ009: INSPECTION AND ACCEPTANCE AT ORIGIN \n\n \nRQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES \n\n AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM \n\n SOURCE APPROVAL - TO BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION, AN \nOFFEROR MUST BE AN APPROVED SOURCE OR PROVIDE THE PRODUCT OF AN APPROVED \nSOURCE AS DETERMINED BY THE ENGINEERING SUPPORT ACTIVITY, NAVAL AIR \nWARFARE CENTER (NAWC) AIRCRAFT DIVISION LAKEHURST. THE CRITERIA AND \nPROCEDURES FOR SOURCE APPROVAL ARE CONTAINED IN PART I OF THE NAVAL \nINVENTORY CONTROL POINT (NAVICP) PHILADELPHIA BROCHURE ENTITLED "SOURCE \nAPPROVAL INFORMATION BROCHURE FOR SPARES". THE LATEST VERSION OF THIS \nBROCHURE MAY BE OBTAINED BY ACCESSING NAVICP'S WEBSITE: \nHTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM, NAVICP, BUSINESS OPPORTUNITIES, \nCOMMODITIES, SOURCE APPROVAL REQUEST (SAR) BROCHURE SPARES \n\n TO ASSIST IN THE DETERMINATION OF SOURCE APPROVAL, THE OFFEROR MAY BE \nREQUIRED TO SUBMIT TO A SURVEY PRIOR TO AWARD IN WHICH NAWC LAKEHURST \nMAY PARTICIPATE. \n\n IN ADDITION, THE OFFEROR MUST PROVIDE THE FOLLOWING INFORMATION, WHICH \nMAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN APPROVED \nSOURCE: \n\n (1) A SOURCE APPROVAL LETTER FROM NAVICP'S ENGINEERING AND PRODUCT \nSUPPORT DIRECTORATE; OR; \n\n (2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETS THE SOURCE APPROVAL \nCRITERIA. \n\n ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR \nMINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND \nAPPROVAL. \n\n ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH \nUNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), \nCONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. \n(February 2016) \n\n NOTE: THIS IS A RESTRICTED SOURCE ITEM AND \nREQUIRES ENGINEERING SOURCE APPROVAL BY THE \nGOVERNMENT DESIGN CONTROL ACTIVITY. \nCLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE \nUSED NOR INCORPORATED IN ANY ITEMS TO BE \nDELIVERED UNDER THIS CONTRACT.THIS PROHIBITION \nSUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT \nDOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. \nSUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR \nAPPROVAL UNLESS THEY ARE AUTHORIZED BY THE \nSPECIFICATION REQUIREMENTS. \nMERCURY OR MERCURY CONTAINING COMPOUNDS SHALL \nNOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT \nCONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED \nUNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY \nUSED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED \nINSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; \nAND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. \nPORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS \nCONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN \nA SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR \nMERCURY COMPOUND. (IAW NAVSEA 5100-003D). \nTHIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH <(>&<)> \nRECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE \nITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA \nDRAWINGS PROVIDED. \n\n BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT \nNUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE \nSPECIFIED ON ASSOCIATED DRAWING. IF A CONFLICT \nEXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE \nITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY. \n\n RD002, COVERED DEFENSE INFORMATION APPLIES \n\n The Government Procuring Activity has determined that Surplus is not \nAcceptable for this NSN. \n(End of TQ Requirement) \n\n RQ032: EXPORT CONTROL OF TECHNICAL DATA \n\n This item has technical data some or all of which is subject to \nexport-control of either the International Traffic in Arms regulations \n(ITAR) or the Export Administration Regulations (EAR), and cannot be \nexported without prior authorization from either the Department of State \nor the Department of Commerce. Export includes disclosure of technical \ndata to foreign persons and nationals whether located in the United \nStates or abroad. This requirement applies equally to foreign national \nemployees and U.S. companies and their foreign subsidiaries. DFARS \n252.225-7048 is applicable to this data. \n\n The Defense Logistics Agency (DLA) limits distribution of export-control \ntechnical data to DLA contractors that have an approved US/Canada Joint \nCertification Program (JCP) certification, have completed the \nIntroduction to Proper Handling of DOD Export-Controlled Technical Data \nTraining and the DLA Export-Controlled Technical Data Questionnaire \n(both are available at the web address given below), and have been \napproved by the DLA controlling authority to access the \nexport-controlled data. Instructions for obtaining access to the \nexport-controlled data can be found at: \nhttps://www.dla.mil/Logistics-Operations/Enhanced-Validation/ \n\n To be eligible for award, offerors and any sources of supply proposed \nfor use are required to have an approved JCP certification and have \nbeen approved by the DLA controlling authority to access \nexport-controlled data managed by DLA. DLA will not delay award in \norder for an offeror or its supplier to apply for and receive approval \nby the DLA controlling authority to access the export-controlled data. \n\n Casting/forging may be required to manufacture this NSN and tooling is \ntypically involved. The government may not have this special tooling. \nFor sourcing, tooling, materials or other information, please submit a \nCasting and Forging Assistance Request at either \nhttps://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or \nLand & Maritime Supply Chains DSCC.cast.forge@dla.mil. \nItem Unique Identification is not required by request of the Service \ncustomer. DFARS 252.211-7003(c)(1)(i) applies. \n\n RQ040: Non-Destructive Testing (NDT) Accreditation Requirements \n\n RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for \nManufacturers and Non-Manufacturers \n\n \nRD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 \nSelf-Assessment \n\n \nCRITICAL APPLICATION ITEM \n\n THE ENTWISTLE COMPANY LLC 20722 P/N 422439-5 \nALFAB INC 1B899 P/N 422439-5 \n\n IAW REFERENCE DRAWING NR 80020 617296 \nREVISION NR H DTD 12/21/2015 \nPART PIECE NUMBER: 617296-1, -6 \n\n IAW REFERENCE DRAWING NR 80020 MPR1057 \nREVISION NR A DTD \nPART PIECE NUMBER: \n\n IAW REFERENCE DRAWING NR 80020 420674 \nREVISION NR R DTD 01/09/2024 \nPART PIECE NUMBER: 420674-4, -5 \n\n IAW REFERENCE DRAWING NR 80020 422439 \nREVISION NR P DTD 06/12/2017 \nPART PIECE NUMBER: 422439-5 \n\n IAW REFERENCE DRAWING NR 80020 617156 \nREVISION NR AB DTD 01/08/2024 \nPART PIECE NUMBER: 617156-6 \n\n IAW REFERENCE DRAWING NR 80020 514761 \nREVISION NR F DTD 08/18/2017 \nPART PIECE NUMBER: 514761-1 \n\n IAW REFERENCE QAP 16236 SQAP012204591CFAT \nREVISION NR B DTD 11/23/2024 \nPART PIECE NUMBER: \n\n IAW REFERENCE QAP 16236 SQAP012204591QA \nREVISION NR C DTD 11/23/2024 \nPART PIECE NUMBER: \n\n IAW REFERENCE DRAWING NR 16236 CN012204591 \nREVISION NR C DTD 11/25/2024 \nPART PIECE NUMBER: \n\n IAW REFERENCE QAP 16236 CDRLS012204591-24302 \nREVISION NR DTD 10/30/2024 \nPART PIECE NUMBER: \n\n The anticipated packaging requirements are as follows: \nPKGING DATA - MIL-STD-2073-1E \nQUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 \nWRAP MAT:GB CUSH/DUNN MAT:GA CUSH/DUNN THKNESS:M \nUNIT CONT:FF OPI:M \nPACK CODE:U \nMARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. \nSPECIAL MARKING CODE:ZZ -ZZ Special Requirements \n\n PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING \n REQUIREMENTS FOR PROCUREMENT \n\n \nSPECIAL PACKAGING INSTRUCTIONS: \nSEAL OR PLUG ALL OPENINGS WITH APPROVED NONCORROSIVE MATERIALS TO \nPREVENT ENTRANCE OF MOISTURE, DIRT AND FOREIGN MATTER. \n\n EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, \nCONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE \nCODE, MANUFACTURER CAGE CODE, AND PART NUMBER. \n\n Material is anticipated to be shipped to: \nPARCEL POST ADDRESS: \n\n SW3216 \n\n DLA DISTRIBUTION PUGET SOUND \n467 W STREET \nBLDG 467 \nBREMERTON WA 98314-6001 \nUS \n\n \nFOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT \n\n FREIGHT SHIPPING ADDRESS: \n\n SW3216 \n\n DISTRIBUTION DEPOT PUGET SOUND \n467 W STREET \nBLDG 467 \nBREMERTON WA 98314-6001 \nUS \n\n The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Origin. \n\n Whether or not this acquisition will be set aside for small businesses is yet to be determined. All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Nathanial Young, Nathanial.e.young@dla.mil on or before December 15, 2025. \n \n"} Solicitation Number: SPE7M126R0003 Type: Sources Sought Base Type: Sources Sought NAICS: 336611 Classification Code: 1720 Response Deadline: 2025-12-15T17:00:00-05:00 Office Address: COLUMBUS, OH POC: Nathanial Young, nathanial.e.young@dla.mil, +1(614)561-8590 {"description":" This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS. All of the following information is approximate and may be altered in the actual solicitation. Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions. DLA Land and Maritime anticipates issuing a solicitation in the near future for approximately 320 EACH of NSN 1720-012204591 \n\n Item will be purchased IAW the following: \nMODULE ASSEMBLY, JET \nALRE CAI \nRC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR) \n\n \nRP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT \n\n \nCertificate of Quality Compliance (CoQC) Contract Data Requirements \nLists (CDRLs), DD Form 1423s, apply to this procurement. Review the \nTechnical Data Package (TDP) for additional information. If \nCDRL-COQCCDRLs is missing from DLA Collaboration Folders (CFolders) they \ncan also be viewed in Appendix 1 of the DLA MASTER LIST OF TECHNICAL AND \nQUALITY REQUIREMENTS FOUND ON THE WEB AT: \n http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx \n\n \nRA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS \n(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE \nDLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB \nAT: \n\n http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx \n\n FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE \nSOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE \nACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE \nAPPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON \nREVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS. \n\n The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, \napply to this procurement. Review the Technical Data Package (TDP) for \nadditional information. \n-First Article Testing Report -Production Test and Inspection Report \n-Certificate of Quality Compliance \nRQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL \nREQUEST FOR VARIANCE (DEVIATION OR WAIVER) \n\n \nRQ009: INSPECTION AND ACCEPTANCE AT ORIGIN \n\n \nRQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES \n\n AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM \n\n SOURCE APPROVAL - TO BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION, AN \nOFFEROR MUST BE AN APPROVED SOURCE OR PROVIDE THE PRODUCT OF AN APPROVED \nSOURCE AS DETERMINED BY THE ENGINEERING SUPPORT ACTIVITY, NAVAL AIR \nWARFARE CENTER (NAWC) AIRCRAFT DIVISION LAKEHURST. THE CRITERIA AND \nPROCEDURES FOR SOURCE APPROVAL ARE CONTAINED IN PART I OF THE NAVAL \nINVENTORY CONTROL POINT (NAVICP) PHILADELPHIA BROCHURE ENTITLED "SOURCE \nAPPROVAL INFORMATION BROCHURE FOR SPARES". THE LATEST VERSION OF THIS \nBROCHURE MAY BE OBTAINED BY ACCESSING NAVICP'S WEBSITE: \nHTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM, NAVICP, BUSINESS OPPORTUNITIES, \nCOMMODITIES, SOURCE APPROVAL REQUEST (SAR) BROCHURE SPARES \n\n TO ASSIST IN THE DETERMINATION OF SOURCE APPROVAL, THE OFFEROR MAY BE \nREQUIRED TO SUBMIT TO A SURVEY PRIOR TO AWARD IN WHICH NAWC LAKEHURST \nMAY PARTICIPATE. \n\n IN ADDITION, THE OFFEROR MUST PROVIDE THE FOLLOWING INFORMATION, WHICH \nMAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN APPROVED \nSOURCE: \n\n (1) A SOURCE APPROVAL LETTER FROM NAVICP'S ENGINEERING AND PRODUCT \nSUPPORT DIRECTORATE; OR; \n\n (2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETS THE SOURCE APPROVAL \nCRITERIA. \n\n ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR \nMINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND \nAPPROVAL. \n\n ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH \nUNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE), \nCONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER. \n(February 2016) \n\n NOTE: THIS IS A RESTRICTED SOURCE ITEM AND \nREQUIRES ENGINEERING SOURCE APPROVAL BY THE \nGOVERNMENT DESIGN CONTROL ACTIVITY. \nCLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE \nUSED NOR INCORPORATED IN ANY ITEMS TO BE \nDELIVERED UNDER THIS CONTRACT.THIS PROHIBITION \nSUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT \nDOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS. \nSUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR \nAPPROVAL UNLESS THEY ARE AUTHORIZED BY THE \nSPECIFICATION REQUIREMENTS. \nMERCURY OR MERCURY CONTAINING COMPOUNDS SHALL \nNOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT \nCONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED \nUNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY \nUSED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED \nINSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; \nAND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. \nPORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS \nCONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN \nA SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR \nMERCURY COMPOUND. (IAW NAVSEA 5100-003D). \nTHIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH <(>&<)> \nRECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE \nITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA \nDRAWINGS PROVIDED. \n\n BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT \nNUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE \nSPECIFIED ON ASSOCIATED DRAWING. IF A CONFLICT \nEXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE \nITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY. \n\n RD002, COVERED DEFENSE INFORMATION APPLIES \n\n The Government Procuring Activity has determined that Surplus is not \nAcceptable for this NSN. \n(End of TQ Requirement) \n\n RQ032: EXPORT CONTROL OF TECHNICAL DATA \n\n This item has technical data some or all of which is subject to \nexport-control of either the International Traffic in Arms regulations \n(ITAR) or the Export Administration Regulations (EAR), and cannot be \nexported without prior authorization from either the Department of State \nor the Department of Commerce. Export includes disclosure of technical \ndata to foreign persons and nationals whether located in the United \nStates or abroad. This requirement applies equally to foreign national \nemployees and U.S. companies and their foreign subsidiaries. DFARS \n252.225-7048 is applicable to this data. \n\n The Defense Logistics Agency (DLA) limits distribution of export-control \ntechnical data to DLA contractors that have an approved US/Canada Joint \nCertification Program (JCP) certification, have completed the \nIntroduction to Proper Handling of DOD Export-Controlled Technical Data \nTraining and the DLA Export-Controlled Technical Data Questionnaire \n(both are available at the web address given below), and have been \napproved by the DLA controlling authority to access the \nexport-controlled data. Instructions for obtaining access to the \nexport-controlled data can be found at: \nhttps://www.dla.mil/Logistics-Operations/Enhanced-Validation/ \n\n To be eligible for award, offerors and any sources of supply proposed \nfor use are required to have an approved JCP certification and have \nbeen approved by the DLA controlling authority to access \nexport-controlled data managed by DLA. DLA will not delay award in \norder for an offeror or its supplier to apply for and receive approval \nby the DLA controlling authority to access the export-controlled data. \n\n Casting/forging may be required to manufacture this NSN and tooling is \ntypically involved. The government may not have this special tooling. \nFor sourcing, tooling, materials or other information, please submit a \nCasting and Forging Assistance Request at either \nhttps://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or \nLand & Maritime Supply Chains DSCC.cast.forge@dla.mil. \nItem Unique Identification is not required by request of the Service \ncustomer. DFARS 252.211-7003(c)(1)(i) applies. \n\n RQ040: Non-Destructive Testing (NDT) Accreditation Requirements \n\n RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for \nManufacturers and Non-Manufacturers \n\n \nRD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 \nSelf-Assessment \n\n \nCRITICAL APPLICATION ITEM \n\n THE ENTWISTLE COMPANY LLC 20722 P/N 422439-5 \nALFAB INC 1B899 P/N 422439-5 \n\n IAW REFERENCE DRAWING NR 80020 617296 \nREVISION NR H DTD 12/21/2015 \nPART PIECE NUMBER: 617296-1, -6 \n\n IAW REFERENCE DRAWING NR 80020 MPR1057 \nREVISION NR A DTD \nPART PIECE NUMBER: \n\n IAW REFERENCE DRAWING NR 80020 420674 \nREVISION NR R DTD 01/09/2024 \nPART PIECE NUMBER: 420674-4, -5 \n\n IAW REFERENCE DRAWING NR 80020 422439 \nREVISION NR P DTD 06/12/2017 \nPART PIECE NUMBER: 422439-5 \n\n IAW REFERENCE DRAWING NR 80020 617156 \nREVISION NR AB DTD 01/08/2024 \nPART PIECE NUMBER: 617156-6 \n\n IAW REFERENCE DRAWING NR 80020 514761 \nREVISION NR F DTD 08/18/2017 \nPART PIECE NUMBER: 514761-1 \n\n IAW REFERENCE QAP 16236 SQAP012204591CFAT \nREVISION NR B DTD 11/23/2024 \nPART PIECE NUMBER: \n\n IAW REFERENCE QAP 16236 SQAP012204591QA \nREVISION NR C DTD 11/23/2024 \nPART PIECE NUMBER: \n\n IAW REFERENCE DRAWING NR 16236 CN012204591 \nREVISION NR C DTD 11/25/2024 \nPART PIECE NUMBER: \n\n IAW REFERENCE QAP 16236 CDRLS012204591-24302 \nREVISION NR DTD 10/30/2024 \nPART PIECE NUMBER: \n\n The anticipated packaging requirements are as follows: \nPKGING DATA - MIL-STD-2073-1E \nQUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00 \nWRAP MAT:GB CUSH/DUNN MAT:GA CUSH/DUNN THKNESS:M \nUNIT CONT:FF OPI:M \nPACK CODE:U \nMARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. \nSPECIAL MARKING CODE:ZZ -ZZ Special Requirements \n\n PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING \n REQUIREMENTS FOR PROCUREMENT \n\n \nSPECIAL PACKAGING INSTRUCTIONS: \nSEAL OR PLUG ALL OPENINGS WITH APPROVED NONCORROSIVE MATERIALS TO \nPREVENT ENTRANCE OF MOISTURE, DIRT AND FOREIGN MATTER. \n\n EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN, \nCONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE \nCODE, MANUFACTURER CAGE CODE, AND PART NUMBER. \n\n Material is anticipated to be shipped to: \nPARCEL POST ADDRESS: \n\n SW3216 \n\n DLA DISTRIBUTION PUGET SOUND \n467 W STREET \nBLDG 467 \nBREMERTON WA 98314-6001 \nUS \n\n \nFOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT \n\n FREIGHT SHIPPING ADDRESS: \n\n SW3216 \n\n DISTRIBUTION DEPOT PUGET SOUND \n467 W STREET \nBLDG 467 \nBREMERTON WA 98314-6001 \nUS \n\n The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Origin. \n\n Whether or not this acquisition will be set aside for small businesses is yet to be determined. All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Nathanial Young, Nathanial.e.young@dla.mil on or before December 15, 2025. \n \n"}