WELDER PACKAGE

Description

{"description":"MIG WELDER PACKAGE 3)\tGeneral RequirementsThis section provides the specification requirements for the Welding Machine Package. Note: Every item listed in this section shall be accounted for in the offeror?s proposal for it to be considered (see section 6.).a)\tSystem shall meet all applicable OSHA standards and regulations.b)\tVendor Shall ensure All Components of the system are compatible. c)\tPower supply shall have a minimum duty cycle of 100% at 36volts/400 amps.d)\tMachine Shall be compatible with 480-volt 3 phase power.e)\tSystem Shall be able to do the following processes,1.\tShielded Metal Arc Welding (SMAW)2.\tDirect Current Gas Tungsten Arc Welding (DC GTAW)a.\tHigh Frequency Startb.\tLift Arc3.\tGas Metal Arc Welding (GMAW)4.\tPulse Gas Metal Arc Welding (GMAW-P)5.\tFlux Core Arc Welding (FCAW)f)\tThe wire feeder shall be a dual wire setup.1.\tThe Wire feeder shall have a minimum duty cycle of 100% at 100 volts/600 amps.2.\tThe Wire feeder Shall include spool covers for 33lb wire spools.3.\tThe Wire feeder Shall include 2, 15ft (min) 300amp Mig gun assemblies.4.\tThe Wire feeder Shall be compatible with ?Miller style? power pins on the Mig gun assemblies.5.\tWire feeder control cable and weld power cable Shall be included.6.\t25 ft work sense lead shall be included.7.\tVendor Shall include Feeder drive roll kits of the following sizes (Dual size reversable are acceptable).a.\t.035 V-Grooveb.\t.045 V-Groovec.\t.062 V-Groove8.\tVendor Shall include Wire Guides of the following sizes.a.\t.035b.\t.045c.\t.062g)\tSystem Shall include a wireless remote foot controller.1.\tWireless foot control Shall accept ?AA? size batteries.2.\tVendor Shall provide batteries to fill the controller not less than 2 times.h)\tSystem Shall include a heavy-duty foot control pedal with 20ft of cord.i)\tSystem Shall Include 2 Sheild Gas Flow meter regulators.j)\tSystem Shall include 2 gas hoses (4ft min).k)\tMachine must include a cooler.1.\tCooler must be removeable for service/repair.l)\tMachine must have dedicated Tig Torch Connection.m)\tMachine must have dedicated Tig Gas hose Connection.n)\tMachine must have dedicated Tig Remote Connection.o)\tMachine must have dedicated Stick Connection.p)\tMachine must have dedicated Work cable Connection.q)\tRunning Gear/Cart Shall be included.1.\t2 brackets to stow the foot controls Shall be included.r)\t25 ft(min) Work Lead Shall be included. "} Solicitation Number: W911S226U2450 Type: Combined Synopsis/Solicitation Base Type: Combined Synopsis/Solicitation NAICS: 333992 Classification Code: 3438 Response Deadline: 2026-01-22T08:00:00-05:00 Office Address: FORT DRUM, NY Place of Performance: 74501 POC: Charlie Snell, charlie.b.snell2.civ@us.navy.mil, 918-420-7525 {"description":"MIG WELDER PACKAGE 3)\tGeneral RequirementsThis section provides the specification requirements for the Welding Machine Package. Note: Every item listed in this section shall be accounted for in the offeror?s proposal for it to be considered (see section 6.).a)\tSystem shall meet all applicable OSHA standards and regulations.b)\tVendor Shall ensure All Components of the system are compatible. c)\tPower supply shall have a minimum duty cycle of 100% at 36volts/400 amps.d)\tMachine Shall be compatible with 480-volt 3 phase power.e)\tSystem Shall be able to do the following processes,1.\tShielded Metal Arc Welding (SMAW)2.\tDirect Current Gas Tungsten Arc Welding (DC GTAW)a.\tHigh Frequency Startb.\tLift Arc3.\tGas Metal Arc Welding (GMAW)4.\tPulse Gas Metal Arc Welding (GMAW-P)5.\tFlux Core Arc Welding (FCAW)f)\tThe wire feeder shall be a dual wire setup.1.\tThe Wire feeder shall have a minimum duty cycle of 100% at 100 volts/600 amps.2.\tThe Wire feeder Shall include spool covers for 33lb wire spools.3.\tThe Wire feeder Shall include 2, 15ft (min) 300amp Mig gun assemblies.4.\tThe Wire feeder Shall be compatible with ?Miller style? power pins on the Mig gun assemblies.5.\tWire feeder control cable and weld power cable Shall be included.6.\t25 ft work sense lead shall be included.7.\tVendor Shall include Feeder drive roll kits of the following sizes (Dual size reversable are acceptable).a.\t.035 V-Grooveb.\t.045 V-Groovec.\t.062 V-Groove8.\tVendor Shall include Wire Guides of the following sizes.a.\t.035b.\t.045c.\t.062g)\tSystem Shall include a wireless remote foot controller.1.\tWireless foot control Shall accept ?AA? size batteries.2.\tVendor Shall provide batteries to fill the controller not less than 2 times.h)\tSystem Shall include a heavy-duty foot control pedal with 20ft of cord.i)\tSystem Shall Include 2 Sheild Gas Flow meter regulators.j)\tSystem Shall include 2 gas hoses (4ft min).k)\tMachine must include a cooler.1.\tCooler must be removeable for service/repair.l)\tMachine must have dedicated Tig Torch Connection.m)\tMachine must have dedicated Tig Gas hose Connection.n)\tMachine must have dedicated Tig Remote Connection.o)\tMachine must have dedicated Stick Connection.p)\tMachine must have dedicated Work cable Connection.q)\tRunning Gear/Cart Shall be included.1.\t2 brackets to stow the foot controls Shall be included.r)\t25 ft(min) Work Lead Shall be included. "}