Vision Cart Utensil Washer/Disinfector

Description

{"description":" STATEMENT OF WORK \nThe contractor shall provide all services, labor, travel, transportation, material, shipping, parts, \nconnections, and equipment necessary for provision and on-site installation of equipment to \nprovide a minimum of two Vision 1327 Cart and Utensil Washer/Disinfectors located at 4801 \nLinwood Blvd, Kansas City MO 64128. The cart washer/disinfector equipment are needed to \nsupport Sterile Processing Service (SPS) for reprocessing sterilization compatible containers and \ntransportation carts used for transportation of reusable medical devices (RMD) used in invasive \nprocedures. They are needed to support medical procedures and surgeries in the operating room, \ndental services, procedural gastroenterology, procedural pulmonology, and surgical clinic \nprocedure. \nThe contractor shall also provide training to clinical staff prior to equipment use, capturing all tours \nof duty for the sterile processing department. The contractor is responsible for removing and \ndisposing of all debris and packing material left from the installation of the ultrasonic equipment. \nThe contract includes two Vision 1327 Cart and Utensil Washer/Disinfectors, full installation \nservices to include necessary installation components and post installation check-out test with \ncompletion of any necessary adjustments. \n2. SPECIFICATIONS \n Minimum of two cart and utensil washer/disinfectors shall have minimum individual \ndimensions of 109 inches (H) x 120 inches (W) x 130 inches (D). \n The cart and utensil washer/disinfector must be capable of reprocessing at minimum two \nheavy case carts and large racks for reprocessing utensils and containers. \n The cart and utensil washer/disinfector must be floor-mounted above the finished floor. \n The cart and utensil washer/disinfector must be steam heated. \n Emergency stop/disconnect capabilities. \n The cart washers must support the following utility requirements: \no Electrical: 460-480 V, 3Phase, 60 HZ, 3kW; 13.5 AMPS; 4000 BTU/HR. \no Auto Drain Valve Electrical: 120 V, 60 Hz. \no Steam Consumption Per Cycle: 14 kg (31lb). \no Hot Water Consumption Per Cycle: 53L (14 U.S. gal).o Air, high pressure 85 psi max. \no Noise Level: 65 dBa. \n The max operating weight of the unit cannot exceed 7483 lbs per washer/disinfector. \n The ultrasonic irrigators must adhere to industry standards for AAMI/ANSI, OSHA, etc. \n Documented FDA approval, as applicable. \n"} Solicitation Number: 36C25526Q0175 Type: Solicitation Base Type: Presolicitation NAICS: 339112 Classification Code: 6515 Response Deadline: 2026-02-27T11:00:00-06:00 Office Address: LEAVENWORTH, KS Place of Performance: Kansas City, Missouri, 64128 POC: Jon Lutmer, Jonathan.lutmer@va.gov, 410-446-3862 {"description":" STATEMENT OF WORK \nThe contractor shall provide all services, labor, travel, transportation, material, shipping, parts, \nconnections, and equipment necessary for provision and on-site installation of equipment to \nprovide a minimum of two Vision 1327 Cart and Utensil Washer/Disinfectors located at 4801 \nLinwood Blvd, Kansas City MO 64128. The cart washer/disinfector equipment are needed to \nsupport Sterile Processing Service (SPS) for reprocessing sterilization compatible containers and \ntransportation carts used for transportation of reusable medical devices (RMD) used in invasive \nprocedures. They are needed to support medical procedures and surgeries in the operating room, \ndental services, procedural gastroenterology, procedural pulmonology, and surgical clinic \nprocedure. \nThe contractor shall also provide training to clinical staff prior to equipment use, capturing all tours \nof duty for the sterile processing department. The contractor is responsible for removing and \ndisposing of all debris and packing material left from the installation of the ultrasonic equipment. \nThe contract includes two Vision 1327 Cart and Utensil Washer/Disinfectors, full installation \nservices to include necessary installation components and post installation check-out test with \ncompletion of any necessary adjustments. \n2. SPECIFICATIONS \n Minimum of two cart and utensil washer/disinfectors shall have minimum individual \ndimensions of 109 inches (H) x 120 inches (W) x 130 inches (D). \n The cart and utensil washer/disinfector must be capable of reprocessing at minimum two \nheavy case carts and large racks for reprocessing utensils and containers. \n The cart and utensil washer/disinfector must be floor-mounted above the finished floor. \n The cart and utensil washer/disinfector must be steam heated. \n Emergency stop/disconnect capabilities. \n The cart washers must support the following utility requirements: \no Electrical: 460-480 V, 3Phase, 60 HZ, 3kW; 13.5 AMPS; 4000 BTU/HR. \no Auto Drain Valve Electrical: 120 V, 60 Hz. \no Steam Consumption Per Cycle: 14 kg (31lb). \no Hot Water Consumption Per Cycle: 53L (14 U.S. gal).o Air, high pressure 85 psi max. \no Noise Level: 65 dBa. \n The max operating weight of the unit cannot exceed 7483 lbs per washer/disinfector. \n The ultrasonic irrigators must adhere to industry standards for AAMI/ANSI, OSHA, etc. \n Documented FDA approval, as applicable. \n"}