USCG Base Miami Beach Replace BLDG 4 Air Compressor

Tender summary

{"description":" This combined synopsis/solicitation for construction services prepared in accordance with the \nformat in subpart 12.6 of the Federal Acquisition Regulation (FAR) as supplemented with additional \ninformation included in this notice. This synopsis/solicitation is being advertised as Small \nBusiness Set-Aside only. This announcement constitutes the only solicitation; no separate written \nsolicitation will be issued. \n\n The solicitation number is 31020PR260000128. Applicable North American Industry Classification \nStandard (NAICS) codes are: \n\n 333912 - Air and Gas Compressor Manufacturing \n\n This requirement is for a fixed price contract. The contract will be awarded using simplified \nacquisition procedures in accordance with FAR part 13 and part 15 \nThe Government will award a contract resulting from this solicitation to the responsible offeror \nwhose offer conforming to the solicitation will be most advantageous to the Government, Best Value. \n\n When submitting your proposals, request a price breakdown of the following: \n\n a. Cost of materials and equipment \nb. Cost of labor \n\n Contract will be awarded to the vendor who can provide Best value which includes all labor, \nmaterial, cost and equipment required within the SOW. Cost and Past Performance factors will also \nbe considered when selecting the award. \n\n Anticipated award date: 10 business days after close of solicitation, OOA 23 March 2026 \n\n \nQuotes are to be received no later than close of business (3 p.m.) on 09 March 2026 and are to be \nsent via e-mail to angel.melendez@uscg.mil \n\n \nQuotations sent via the US Postal Service or hand delivered should be sent to: \nCommanding Officer \n\n USCG Base Miami Beach (P&C) Attn: Angel Melendez \n12100 SW 152ⁿᵈ ST Miami, FL 33177. \n\n Telephone requests of quotes, will not be accepted, a formal notice of changes (if applicable) \nwill be issued in SAM (www.sam.gov). \n\n Wage determinations: FL20240184 01/05/2024 \n\n SCOPE OF WORK: \n\n \nDEPARTMENT OF HOMELAND SECURITY UNITED STATES COAST GUARD \nBASE MIAMI BEACH SPECIFICATIONS FOR \nReplace Air Compressor BLDG 4 \n\n GENERAL: United States Coast Guard Base Miami Beach is accepting proposals for qualified \nindividuals or firms to replace the air compressor at building 4 at Base Miami Beach. Prior to \nsubmitting a quote, it is mandatory to examine the scope of work, and it’s highly encouraged to \nvisit the facility to take field measurements, evaluations, etc., and become familiar with existing \nconditions under which the work will be performed. After the award of contract, a pre conference \nwill be held prior to starting the work at Coast Guard Base Miami Beach. \n\n LOCATION: \nUnited States Coast Guard Base Miami Beach 100 MacArthur Causeway \nMiami, FL 33139 \n\n EXAMINATION OF SITE: It is HIGHLY ENCOURAGED that bidders carefully inspect the workplace and \nverify work necessary to complete the job. Prospective bidders arrange for a tour of the job site \nby calling the point of contact, MKC Scott Lane at (727) 688-3425 or by e-mail at \nScott.W.Lane@uscg.mil, at least 3 working days in advance. \n\n I. CONTINUITY OF FACILITIES OPERATIONS: Schedule work to minimize interference with the facility’s \nnormal operations. Normal operating hours are from 6:30am to 3:00pm Monday thru Friday except \nfederal holidays. Any work during other hours shall be requested in writing at least 5 working days \nin advance and must be approved by the Contracting Officer. \n\n II. NOTIFICATION OF START/COMPLETION: The Contractor shall notify the Coast Guard one week prior to \nstart of work, the start and projected completion date. \nIII. COAST GUARD CONTRACTING OFFICER REPRESENTATIVE: The Contractor \nshall contact the Contracting Officer’s Representative (COR) to coordinate all construction \nefforts onboard Coast Guard Facilities. \nMr. Boris Abello- COR Boris.Abello@uscg.mil 305-535-4564 \n\n IV. RECYCLING AND DISPOSAL OF REFUSE: Minor refuse, excess or waste materials resulting from \nconstruction operations may be disposed of in base dumpsters. All disposals shall be done in \naccordance with federal, state, and local laws and regulations. All bulk waste shall be disposed of \nin contractor provided dumpsters. \n\n V. SAFETY: During the execution of this contract, the Contractor shall conform to the rules and \nregulations as set forth by OSHA Safety and Health Standards, 29 CFR Part 1926 - Safety and Health \nRegulations for Construction. The contractor shall have a written safety plan as required in FAR \n5.236-13. The plan shall unequivocally assign responsibility and authority for safety to \nthe superintendent by name. Immediate notification to the Contracting Officer’s Representative of \nlost time due to accidents is required. Provide two copies of workman’s compensation \n\n accident reports by noon of the day following the accident. The Coast Guard reserves the right to \nbar any workers or supervisors from the premises should they be documented as violating set safety \nstandards and regulations. \n\n VI. INSPECTION: The Contracting Officer’s Representative has the right to reject defective \nworkmanship or materials or work not performed as per the project specifications. Only the \nContracting Officer or his/her representative may accept work performed by the contractor. \nVII. OPERATIONS AND STORAGE: The contractor is to take whatever steps necessary to ensure that his \nmaterials are protected. The Coast Guard has no responsibility for receipt, storage, or protection \nof contractor’s materials. All equipment, materials and supplies shall be addressed to the \ncontractor. The Coast Guard will not accept shipments. The contractor is responsible for the \nprotection of existing structures, utilities, work and vegetation. Any damage shall be repaired at \nthe contractor’s expense. \n\n VIII. CONTRTACTOR IDENTIFICATION: The contractor and subcontractor personnel shall always wear \ncompany identification and carry personal identification. \n\n IX. EXISTING UTILITIES: The Contractor shall field verify all utility locations before commencing \nwork. This shall include, but not be limited to, the use of visual, sonic, electronic or magnetic \ndetection devices. Contractor shall be responsible for repairing any utilities damaged during \nconstruction at no additional cost to the Government. \n\n X. REGULATIONS WHILE ONBOARD COAST GUARD BASE MIAMI BEACH: \n\n 1. Daily colors and the raising/lowering of the American flag will take place every morning at 0800 \nand every evening at sunset. All personnel on Base will face the main flagpole & maintain silence \nand all vehicles & equipment will halt during these brief events. \n2. The construction site shall always be maintained in a clean condition. This included daily \nclean-ups of the construction and storage areas (FAR 52.236-12). The site shall be well lit and \nwell barricaded/cordoned off as appropriate. \n3. Contractors are welcome to eat breakfast & lunch on Base in the base galley at cost. Breakfast \nis served from 0630-0730 daily & lunch will be served from 1130-1230 daily in the galley. All \npersonnel desiring meal service shall be in clean, non-soiled clothing. The Coast guard reserves \nthe right to refuse service to anyone it deems not hygienically acceptable. \n4. There is one smoking area on base located in the central northern parking lot covered by the \ntiki hut. No smoking is permitted anywhere else on base. \n5. Contractors are welcome to utilize the Base’s Exchange store; however, contracted \npersonnel are prohibited from purchasing any uniform, alcohol or tobacco products. \n6. Traffic Regulations: \na) 10 mph speed limit \nb) No use of cell phones is permitted while driving vehicles or operating heavy machinery. \nc) All personnel shall obey all marked traffic signals including stop signs & stop lights. \n7. Absolutely no firearms or weapons of any kind are allowed onboard Base Miami Beach. \n8. Only American citizens and permanent resident aliens are allowed onboard Base Miami Beach \nFacilities. Absolutely no foreign nationals are permitted on the premises. \n9. Notice shall be given to the Coast Guard’s representative 1 week in advance of any \nplanned power, water, sewage or lighting outages. \n\n 10. The contractor shall provide a consolidated list of all contracted personnel including their \ndriver’s license numbers (or other valid gov’t issued ID number) who will be working on Base Miami \nBeach Facilities either the day of or prior to the notice to proceed date. \n11. Contractors are welcome to utilize the restrooms on the 1st decks of Buildings 3, 4, and 7 \nproviding they are clean and do not track mud, dirt or any other debris into the restrooms. \n12. Should warnings of gale force or stronger winds, or other inbound natural disasters be issued, \nthe contractor shall take every practicable precaution to minimize the danger to persons, to the \nwork, and the adjacent property. These precautions include closing all openings, removing all loose \nmaterials, tools and equipment from exposed locations, and removing or securing scaffolding, \nsecuring field trailers, and other appropriate equipment and other temporary work. \n13. No personnel other than the Contracting Officer has the authority to alter the terms of any \ncontract or to issue any change orders. \n14. All contractor vehicles, equipment and gear onboard Coast Guard properties are always subject \nto search. Additionally, contractors are subject to orders to evacuate the property \nat any time. \n15. Due to the compact & dense nature of operations & support functions ongoing on-board Base Miami \nBeach all efforts within reason to minimize the size and footprint of the contractor’s lay down \narea shall be taken. Contractors shall carpool as much as possible \nto minimize the number of vehicles needing parking on Base. At a minimum, the ratio of contractors \nto contractor vehicles shall be no less than 2:1. \n16. All piers and waterfront bulkheads on base Miami Beach are load restricted in some form. If \ncontractors need to bring heavy equipment (cranes, forklifts, 18 wheelers, man lifts, construction \nequipment, backhoes, excavators or other equipment heavier than \nstandard sedans) closer than 40’ to any pier or waterfront bulkhead on Base to complete their \nproject, the contractor shall submit a request for information (RFI) to the COR at least 1 week in \nadvance. \n17. The entrance bridge to Base Miami Beach is an HS20-44 rated bridge. Contractor cannot exceed \nthis rating. If the combined vehicle, trailer, and payload weight is over 50,000 lbs. \nthe contractor shall submit an RFI to the COR at least 1 week in advance. \n\n XI. SCOPE OF WORK: \n1. Below work will be completed onboard Base Miami Beach. \n2. Contractor shall provide ALL labor and materials necessary to install a new NXD55 base-mounted \nair compressor rated 460V / 3-phase / 60Hz, 324 CFM @ 125 PSI, equipped with an I-Command Touch \nPlus controller. \n3. Contractor shall comply with submittal requirements, if applicable. \n4. Contractor shall disconnect the existing air compressor from electrical supply after Coast Guard \nsecures and locks out power. \n5. Contractor shall disconnect the compressor from compressed air discharge piping. \n6. Contractor shall disconnect condensate drain piping. \n7. Contractor shall drain lubricating oil and condensate and dispose of in accordance with \napplicable environmental regulations. \n8. Contractor shall cap or seal open piping to prevent contamination of the air system. \n9. Contractor shall prepare the unit for removal. \n10. Contractor shall coordinate with Coast Guard personnel for lifting and physical removal of the \nexisting compressor. \n11. Contractor shall inspect the existing housekeeping pad for suitability prior to installation. \n12. Contractor shall position the new base-mounted NXD55 compressor on the existing pad. \n13. Contractor shall install vibration isolation pads or anchoring hardware in accordance with \n\n manufacturer requirements. \n14. Contractor shall connect the compressor discharge to the existing compressed air piping. \n15. Contractor shall install a flexible connection at the discharge to prevent vibration transfer \nto the piping system. \n16. Contractor shall connect condensate drain piping to the existing drain system. \n17. Contractor shall fill the unit with manufacturer-approved lubricating oil, if required. \n18. Contractor shall verify proper mounting stability and alignment. \n19. Contractor shall perform functional performance testing under load conditions. \n20. Contractor shall demonstrate proper compressor operation to the Government representative. \n21. Contractor shall verify rated performance consistent with manufacturer specifications (324 CFM \n@ 125 PSI). \n22. Contractor shall provide a written startup and commissioning report. \n23. Contractor shall not modify existing ductwork. \n24. Contractor shall not modify or upgrade electrical distribution equipment. \n25. Contractor shall not provide rigging equipment or crane services. \n26. Contractor shall not redesign compressed air header systems. \n27. Contractor shall not install additional air dryers, receivers, or filtration equipment unless \nseparately specified. \n28. Coast Guard shall secure and lock out electrical power prior to contractor work. \n29. Coast Guard shall provide lifting equipment and personnel for removal of existing equipment and \nplacement of new equipment. \n30. Coast Guard shall perform any required modifications to existing ductwork, if necessary. \n31. Coast Guard shall perform any required modifications to existing electrical infrastructure, if \nnecessary. \n32. Contractor shall be responsible for the removal of all trash and debris from project area upon \ncompletion. \nAll work must be approved by the Contracting Officer’s Representative. \n\n XII. SUBMITTALS: If applicable, submittals shall be approved before procurement, fabrication, or \ndelivery of items to the job site. Partial submittals will not be accepted and will be returned \nwithout review. Submittals shall include the manufacturer's name, trade name, catalog model or \nnumber, nameplate data, size, layout dimensions, capacity, project specification and paragraph \nreference, applicable Federal, Military, industry and technical society references, and other \ninformation necessary to establish contract compliance of each item the Contractor proposes to \nfurnish. Failure to furnish required submittals can cause rejection of the material. Approval of \nsubmittals shall not relieve the contractor his obligation to comply with the contract \nspecifications and drawings. \n\n 1. Manufacturer's Installation Instructions (3 each) \nWhere installation procedures or any part hereof are required to be in accordance with the \ninstructions of the manufacturer of the material being installed, printed copies of these \ninstruction and/or recommendations shall be furnished to the Contracting Officer prior to \ninstallation. Installation of the item will not be allowed until the instruction and/or \nrecommendations are received. Failure to furnish these documents can cause rejection of the \nmaterial. With this submittal, explicitly identify in writing any differences between \nmanufacturer's instructions and the requirements specified herein. \n\n 2. Operation and Maintenance Manuals (3 each) \nFurnish an operation and maintenance manual section for each item of equipment. Furnish three \ncopies of the complete manual bound in hardback binders. Furnish one \n\n complete manual prior to the time that equipment tests are performed and furnish the remaining \nmanuals before the contract is completed. Inscribe the following identification on the cover: the \nwords "OPERATION AND MAINTENANCE MANUAL", the name and location of the equipment, the name of the \ncontractor, and the contract number. The manual shall include the names, addresses, and telephone \nnumbers of each subcontractor installing equipment, and of the local representatives for each item \nof equipment. The manual shall have a table of contents and be assembled to conform to the table of \ncontents with the tab sheets placed before instructions covering the subject. The instructions \nshall be legible and easily read, with large sheets of drawings folded in. The manual shall \ninclude: a complete description of the system, wiring and control diagrams with data to explain \ndetailed operation and control of each item of equipment; a control sequence describing start-up, \noperation and shut-down instructions; installation instructions; maintenance instructions; \nlubrication schedule including type, grade, temperature range, and frequency; safety precautions, \ndiagrams, and illustrations; test procedures; performance data; and parts list. The parts lists for \nequipment shall indicate the sources of supply, recommended spare parts, and the service \norganization, which is reasonably convenient to the project site. The manual shall be complete in \nall respects for equipment, controls, accessories, and associated appurtenances provided. Submit an \nelectronic copy of Operation and Maintenance Manuals with all documents scanned to PDF format on a \nCD-ROM disk. \n\n 3. Operating Instructions (3 each) \nFurnish manufacturer's operating instructions for the principal mechanical and electrical \ncomponents, for use by operating personnel. A copy shall be provided in each of the three \noperations and maintenance manuals. The fourth copy shall be laminated between thermoplastic sheets \nand affixed where directed by COR adjacent to each item of equipment. Operating instructions shall \nnot face when exposed to sunlight and shall be secured to prevent easy removal or peeling. The \noperating instructions shall include wiring diagrams, control diagrams, and control sequences for \neach principal item of equipment. The instructions shall describe the functions of the equipment, \nits most economical operation, start-up and shutdown procedures, procedures to follow in the event \nof failure, normal maintenance practices, and caution and warning notices. Submit an electronic \ncopy of Operating Instructions with all documents scanned to PDF format on a CD-ROM disk. \n4. Additional Submittals \nThe following additional submittals will be required for this project and are subject to the \nsubmittal requirements outlined above: \n• Contractor shall provide manufacturer installation checklist. \n• Contractor shall provide startup report. \n• Contractor shall provide warranty documentation. \n• Contractor shall provide confirmation of final operating settings. \n\n \nXIII: WARRANTY: Submit three signed copies of Manufacturer’s Product Warranty for \nentrance system as follows: \n1. Warranty Period: Five years from date of completion of the project, provided that the limited \nwarranty begins in no event later than six months from date of shipment by manufacturer. Ensure \nwarranty language is identical to “as approved” version of the sample warranty submitted and \nreturned from the COR and one year warranty for labor. \n\n \n Site visit: It is highly recommended and encouraged that interested party’s contact Mr. Boris \nAbello for a site visit which will be held on Friday Febuary 27, 2026 at 09:00AM EST. For \nscheduling contact Mr. Abello via email Boris.Abello@uscg.mil Or via phone at (305) \n535-4564. \n\n \nPerformance Period: Performance of work is expected to commence NLT 10 days after award is made. \nExtension period must be approved by the Contracting Officer for any unforeseen delays. \n\n **All Questions and Answers will not be accepted after 04 March 2026 at 10:00AM EST. \n\n APPLICABLE FAR CLAUSES \nFAR 52.213-4: 52.213-4 Terms and Conditions-Simplified Acquisitions (Other \nThan Commercial Items). ATTACHED BY REFERENCE \n52.222-6 CONSTRUCTION WAGE RATE REQUIREMENTS \n52.236-2 DIFFERING SITE CONDITIONS (APRIL 1984) \n52.236-3 SITE INVESTIGATION AND CONDITIONS AFFECTING THE WORK (APRIL 1984) \n52.236-27 SITE VISIT (CONSTRUCTION) {FEB 1995) \nWork hours: Monday through Friday, 0730 – 1800 (7:30 am – 6 pm) No weekends or Holidays authorized. \n\n See attached applicable FAR Clauses by reference. \nOfferors may obtain full text version of these clauses electronically at: www.arnet.gov/far \nThe following Homeland Security Acquisition Regulations (HSAR) are incorporated as addenda to this \nsolicitation: HSAR 3052.209-70 Prohibition on Contracts with Corporate Expatriates (Jun 2006); \nContracting Officers Technical Representative (Dec 2003) (COTR) HSAR 3052.237-72. Copies of HSAR \n\n Vendors providing an offer must be registered in SAM (System for Award Management) \nprior to close of this solicitation. https://www.sam.gov/portal/public/SAM/. The vendors \nSAM registration must be in an “ACTIVE” status prior to award. \n \n"} Solicitation Number: 31020PR260000128 Type: Combined Synopsis/Solicitation Base Type: Combined Synopsis/Solicitation NAICS: 333912 Classification Code: 4310 Response Deadline: 2026-03-09T15:00:00-04:00 Office Address: MIAMI, FL Place of Performance: Miami Beach, Florida, 33139 POC: Mr. Boris Abello, Boris.Abello@uscg.mil, 3055354564 POC: CWO RYAN ROMESBURG, RYAN.T.ROMESBURG@USCG.MIL, 3055354547 {"description":" This combined synopsis/solicitation for construction services prepared in accordance with the \nformat in subpart 12.6 of the Federal Acquisition Regulation (FAR) as supplemented with additional \ninformation included in this notice. This synopsis/solicitation is being advertised as Small \nBusiness Set-Aside only. This announcement constitutes the only solicitation; no separate written \nsolicitation will be issued. \n\n The solicitation number is 31020PR260000128. Applicable North American Industry Classification \nStandard (NAICS) codes are: \n\n 333912 - Air and Gas Compressor Manufacturing \n\n This requirement is for a fixed price contract. The contract will be awarded using simplified \nacquisition procedures in accordance with FAR part 13 and part 15 \nThe Government will award a contract resulting from this solicitation to the responsible offeror \nwhose offer conforming to the solicitation will be most advantageous to the Government, Best Value. \n\n When submitting your proposals, request a price breakdown of the following: \n\n a. Cost of materials and equipment \nb. Cost of labor \n\n Contract will be awarded to the vendor who can provide Best value which includes all labor, \nmaterial, cost and equipment required within the SOW. Cost and Past Performance factors will also \nbe considered when selecting the award. \n\n Anticipated award date: 10 business days after close of solicitation, OOA 23 March 2026 \n\n \nQuotes are to be received no later than close of business (3 p.m.) on 09 March 2026 and are to be \nsent via e-mail to angel.melendez@uscg.mil \n\n \nQuotations sent via the US Postal Service or hand delivered should be sent to: \nCommanding Officer \n\n USCG Base Miami Beach (P&C) Attn: Angel Melendez \n12100 SW 152ⁿᵈ ST Miami, FL 33177. \n\n Telephone requests of quotes, will not be accepted, a formal notice of changes (if applicable) \nwill be issued in SAM (www.sam.gov). \n\n Wage determinations: FL20240184 01/05/2024 \n\n SCOPE OF WORK: \n\n \nDEPARTMENT OF HOMELAND SECURITY UNITED STATES COAST GUARD \nBASE MIAMI BEACH SPECIFICATIONS FOR \nReplace Air Compressor BLDG 4 \n\n GENERAL: United States Coast Guard Base Miami Beach is accepting proposals for qualified \nindividuals or firms to replace the air compressor at building 4 at Base Miami Beach. Prior to \nsubmitting a quote, it is mandatory to examine the scope of work, and it’s highly encouraged to \nvisit the facility to take field measurements, evaluations, etc., and become familiar with existing \nconditions under which the work will be performed. After the award of contract, a pre conference \nwill be held prior to starting the work at Coast Guard Base Miami Beach. \n\n LOCATION: \nUnited States Coast Guard Base Miami Beach 100 MacArthur Causeway \nMiami, FL 33139 \n\n EXAMINATION OF SITE: It is HIGHLY ENCOURAGED that bidders carefully inspect the workplace and \nverify work necessary to complete the job. Prospective bidders arrange for a tour of the job site \nby calling the point of contact, MKC Scott Lane at (727) 688-3425 or by e-mail at \nScott.W.Lane@uscg.mil, at least 3 working days in advance. \n\n I. CONTINUITY OF FACILITIES OPERATIONS: Schedule work to minimize interference with the facility’s \nnormal operations. Normal operating hours are from 6:30am to 3:00pm Monday thru Friday except \nfederal holidays. Any work during other hours shall be requested in writing at least 5 working days \nin advance and must be approved by the Contracting Officer. \n\n II. NOTIFICATION OF START/COMPLETION: The Contractor shall notify the Coast Guard one week prior to \nstart of work, the start and projected completion date. \nIII. COAST GUARD CONTRACTING OFFICER REPRESENTATIVE: The Contractor \nshall contact the Contracting Officer’s Representative (COR) to coordinate all construction \nefforts onboard Coast Guard Facilities. \nMr. Boris Abello- COR Boris.Abello@uscg.mil 305-535-4564 \n\n IV. RECYCLING AND DISPOSAL OF REFUSE: Minor refuse, excess or waste materials resulting from \nconstruction operations may be disposed of in base dumpsters. All disposals shall be done in \naccordance with federal, state, and local laws and regulations. All bulk waste shall be disposed of \nin contractor provided dumpsters. \n\n V. SAFETY: During the execution of this contract, the Contractor shall conform to the rules and \nregulations as set forth by OSHA Safety and Health Standards, 29 CFR Part 1926 - Safety and Health \nRegulations for Construction. The contractor shall have a written safety plan as required in FAR \n5.236-13. The plan shall unequivocally assign responsibility and authority for safety to \nthe superintendent by name. Immediate notification to the Contracting Officer’s Representative of \nlost time due to accidents is required. Provide two copies of workman’s compensation \n\n accident reports by noon of the day following the accident. The Coast Guard reserves the right to \nbar any workers or supervisors from the premises should they be documented as violating set safety \nstandards and regulations. \n\n VI. INSPECTION: The Contracting Officer’s Representative has the right to reject defective \nworkmanship or materials or work not performed as per the project specifications. Only the \nContracting Officer or his/her representative may accept work performed by the contractor. \nVII. OPERATIONS AND STORAGE: The contractor is to take whatever steps necessary to ensure that his \nmaterials are protected. The Coast Guard has no responsibility for receipt, storage, or protection \nof contractor’s materials. All equipment, materials and supplies shall be addressed to the \ncontractor. The Coast Guard will not accept shipments. The contractor is responsible for the \nprotection of existing structures, utilities, work and vegetation. Any damage shall be repaired at \nthe contractor’s expense. \n\n VIII. CONTRTACTOR IDENTIFICATION: The contractor and subcontractor personnel shall always wear \ncompany identification and carry personal identification. \n\n IX. EXISTING UTILITIES: The Contractor shall field verify all utility locations before commencing \nwork. This shall include, but not be limited to, the use of visual, sonic, electronic or magnetic \ndetection devices. Contractor shall be responsible for repairing any utilities damaged during \nconstruction at no additional cost to the Government. \n\n X. REGULATIONS WHILE ONBOARD COAST GUARD BASE MIAMI BEACH: \n\n 1. Daily colors and the raising/lowering of the American flag will take place every morning at 0800 \nand every evening at sunset. All personnel on Base will face the main flagpole & maintain silence \nand all vehicles & equipment will halt during these brief events. \n2. The construction site shall always be maintained in a clean condition. This included daily \nclean-ups of the construction and storage areas (FAR 52.236-12). The site shall be well lit and \nwell barricaded/cordoned off as appropriate. \n3. Contractors are welcome to eat breakfast & lunch on Base in the base galley at cost. Breakfast \nis served from 0630-0730 daily & lunch will be served from 1130-1230 daily in the galley. All \npersonnel desiring meal service shall be in clean, non-soiled clothing. The Coast guard reserves \nthe right to refuse service to anyone it deems not hygienically acceptable. \n4. There is one smoking area on base located in the central northern parking lot covered by the \ntiki hut. No smoking is permitted anywhere else on base. \n5. Contractors are welcome to utilize the Base’s Exchange store; however, contracted \npersonnel are prohibited from purchasing any uniform, alcohol or tobacco products. \n6. Traffic Regulations: \na) 10 mph speed limit \nb) No use of cell phones is permitted while driving vehicles or operating heavy machinery. \nc) All personnel shall obey all marked traffic signals including stop signs & stop lights. \n7. Absolutely no firearms or weapons of any kind are allowed onboard Base Miami Beach. \n8. Only American citizens and permanent resident aliens are allowed onboard Base Miami Beach \nFacilities. Absolutely no foreign nationals are permitted on the premises. \n9. Notice shall be given to the Coast Guard’s representative 1 week in advance of any \nplanned power, water, sewage or lighting outages. \n\n 10. The contractor shall provide a consolidated list of all contracted personnel including their \ndriver’s license numbers (or other valid gov’t issued ID number) who will be working on Base Miami \nBeach Facilities either the day of or prior to the notice to proceed date. \n11. Contractors are welcome to utilize the restrooms on the 1st decks of Buildings 3, 4, and 7 \nproviding they are clean and do not track mud, dirt or any other debris into the restrooms. \n12. Should warnings of gale force or stronger winds, or other inbound natural disasters be issued, \nthe contractor shall take every practicable precaution to minimize the danger to persons, to the \nwork, and the adjacent property. These precautions include closing all openings, removing all loose \nmaterials, tools and equipment from exposed locations, and removing or securing scaffolding, \nsecuring field trailers, and other appropriate equipment and other temporary work. \n13. No personnel other than the Contracting Officer has the authority to alter the terms of any \ncontract or to issue any change orders. \n14. All contractor vehicles, equipment and gear onboard Coast Guard properties are always subject \nto search. Additionally, contractors are subject to orders to evacuate the property \nat any time. \n15. Due to the compact & dense nature of operations & support functions ongoing on-board Base Miami \nBeach all efforts within reason to minimize the size and footprint of the contractor’s lay down \narea shall be taken. Contractors shall carpool as much as possible \nto minimize the number of vehicles needing parking on Base. At a minimum, the ratio of contractors \nto contractor vehicles shall be no less than 2:1. \n16. All piers and waterfront bulkheads on base Miami Beach are load restricted in some form. If \ncontractors need to bring heavy equipment (cranes, forklifts, 18 wheelers, man lifts, construction \nequipment, backhoes, excavators or other equipment heavier than \nstandard sedans) closer than 40’ to any pier or waterfront bulkhead on Base to complete their \nproject, the contractor shall submit a request for information (RFI) to the COR at least 1 week in \nadvance. \n17. The entrance bridge to Base Miami Beach is an HS20-44 rated bridge. Contractor cannot exceed \nthis rating. If the combined vehicle, trailer, and payload weight is over 50,000 lbs. \nthe contractor shall submit an RFI to the COR at least 1 week in advance. \n\n XI. SCOPE OF WORK: \n1. Below work will be completed onboard Base Miami Beach. \n2. Contractor shall provide ALL labor and materials necessary to install a new NXD55 base-mounted \nair compressor rated 460V / 3-phase / 60Hz, 324 CFM @ 125 PSI, equipped with an I-Command Touch \nPlus controller. \n3. Contractor shall comply with submittal requirements, if applicable. \n4. Contractor shall disconnect the existing air compressor from electrical supply after Coast Guard \nsecures and locks out power. \n5. Contractor shall disconnect the compressor from compressed air discharge piping. \n6. Contractor shall disconnect condensate drain piping. \n7. Contractor shall drain lubricating oil and condensate and dispose of in accordance with \napplicable environmental regulations. \n8. Contractor shall cap or seal open piping to prevent contamination of the air system. \n9. Contractor shall prepare the unit for removal. \n10. Contractor shall coordinate with Coast Guard personnel for lifting and physical removal of the \nexisting compressor. \n11. Contractor shall inspect the existing housekeeping pad for suitability prior to installation. \n12. Contractor shall position the new base-mounted NXD55 compressor on the existing pad. \n13. Contractor shall install vibration isolation pads or anchoring hardware in accordance with \n\n manufacturer requirements. \n14. Contractor shall connect the compressor discharge to the existing compressed air piping. \n15. Contractor shall install a flexible connection at the discharge to prevent vibration transfer \nto the piping system. \n16. Contractor shall connect condensate drain piping to the existing drain system. \n17. Contractor shall fill the unit with manufacturer-approved lubricating oil, if required. \n18. Contractor shall verify proper mounting stability and alignment. \n19. Contractor shall perform functional performance testing under load conditions. \n20. Contractor shall demonstrate proper compressor operation to the Government representative. \n21. Contractor shall verify rated performance consistent with manufacturer specifications (324 CFM \n@ 125 PSI). \n22. Contractor shall provide a written startup and commissioning report. \n23. Contractor shall not modify existing ductwork. \n24. Contractor shall not modify or upgrade electrical distribution equipment. \n25. Contractor shall not provide rigging equipment or crane services. \n26. Contractor shall not redesign compressed air header systems. \n27. Contractor shall not install additional air dryers, receivers, or filtration equipment unless \nseparately specified. \n28. Coast Guard shall secure and lock out electrical power prior to contractor work. \n29. Coast Guard shall provide lifting equipment and personnel for removal of existing equipment and \nplacement of new equipment. \n30. Coast Guard shall perform any required modifications to existing ductwork, if necessary. \n31. Coast Guard shall perform any required modifications to existing electrical infrastructure, if \nnecessary. \n32. Contractor shall be responsible for the removal of all trash and debris from project area upon \ncompletion. \nAll work must be approved by the Contracting Officer’s Representative. \n\n XII. SUBMITTALS: If applicable, submittals shall be approved before procurement, fabrication, or \ndelivery of items to the job site. Partial submittals will not be accepted and will be returned \nwithout review. Submittals shall include the manufacturer's name, trade name, catalog model or \nnumber, nameplate data, size, layout dimensions, capacity, project specification and paragraph \nreference, applicable Federal, Military, industry and technical society references, and other \ninformation necessary to establish contract compliance of each item the Contractor proposes to \nfurnish. Failure to furnish required submittals can cause rejection of the material. Approval of \nsubmittals shall not relieve the contractor his obligation to comply with the contract \nspecifications and drawings. \n\n 1. Manufacturer's Installation Instructions (3 each) \nWhere installation procedures or any part hereof are required to be in accordance with the \ninstructions of the manufacturer of the material being installed, printed copies of these \ninstruction and/or recommendations shall be furnished to the Contracting Officer prior to \ninstallation. Installation of the item will not be allowed until the instruction and/or \nrecommendations are received. Failure to furnish these documents can cause rejection of the \nmaterial. With this submittal, explicitly identify in writing any differences between \nmanufacturer's instructions and the requirements specified herein. \n\n 2. Operation and Maintenance Manuals (3 each) \nFurnish an operation and maintenance manual section for each item of equipment. Furnish three \ncopies of the complete manual bound in hardback binders. Furnish one \n\n complete manual prior to the time that equipment tests are performed and furnish the remaining \nmanuals before the contract is completed. Inscribe the following identification on the cover: the \nwords "OPERATION AND MAINTENANCE MANUAL", the name and location of the equipment, the name of the \ncontractor, and the contract number. The manual shall include the names, addresses, and telephone \nnumbers of each subcontractor installing equipment, and of the local representatives for each item \nof equipment. The manual shall have a table of contents and be assembled to conform to the table of \ncontents with the tab sheets placed before instructions covering the subject. The instructions \nshall be legible and easily read, with large sheets of drawings folded in. The manual shall \ninclude: a complete description of the system, wiring and control diagrams with data to explain \ndetailed operation and control of each item of equipment; a control sequence describing start-up, \noperation and shut-down instructions; installation instructions; maintenance instructions; \nlubrication schedule including type, grade, temperature range, and frequency; safety precautions, \ndiagrams, and illustrations; test procedures; performance data; and parts list. The parts lists for \nequipment shall indicate the sources of supply, recommended spare parts, and the service \norganization, which is reasonably convenient to the project site. The manual shall be complete in \nall respects for equipment, controls, accessories, and associated appurtenances provided. Submit an \nelectronic copy of Operation and Maintenance Manuals with all documents scanned to PDF format on a \nCD-ROM disk. \n\n 3. Operating Instructions (3 each) \nFurnish manufacturer's operating instructions for the principal mechanical and electrical \ncomponents, for use by operating personnel. A copy shall be provided in each of the three \noperations and maintenance manuals. The fourth copy shall be laminated between thermoplastic sheets \nand affixed where directed by COR adjacent to each item of equipment. Operating instructions shall \nnot face when exposed to sunlight and shall be secured to prevent easy removal or peeling. The \noperating instructions shall include wiring diagrams, control diagrams, and control sequences for \neach principal item of equipment. The instructions shall describe the functions of the equipment, \nits most economical operation, start-up and shutdown procedures, procedures to follow in the event \nof failure, normal maintenance practices, and caution and warning notices. Submit an electronic \ncopy of Operating Instructions with all documents scanned to PDF format on a CD-ROM disk. \n4. Additional Submittals \nThe following additional submittals will be required for this project and are subject to the \nsubmittal requirements outlined above: \n• Contractor shall provide manufacturer installation checklist. \n• Contractor shall provide startup report. \n• Contractor shall provide warranty documentation. \n• Contractor shall provide confirmation of final operating settings. \n\n \nXIII: WARRANTY: Submit three signed copies of Manufacturer’s Product Warranty for \nentrance system as follows: \n1. Warranty Period: Five years from date of completion of the project, provided that the limited \nwarranty begins in no event later than six months from date of shipment by manufacturer. Ensure \nwarranty language is identical to “as approved” version of the sample warranty submitted and \nreturned from the COR and one year warranty for labor. \n\n \n Site visit: It is highly recommended and encouraged that interested party’s contact Mr. Boris \nAbello for a site visit which will be held on Friday Febuary 27, 2026 at 09:00AM EST. For \nscheduling contact Mr. Abello via email Boris.Abello@uscg.mil Or via phone at (305) \n535-4564. \n\n \nPerformance Period: Performance of work is expected to commence NLT 10 days after award is made. \nExtension period must be approved by the Contracting Officer for any unforeseen delays. \n\n **All Questions and Answers will not be accepted after 04 March 2026 at 10:00AM EST. \n\n APPLICABLE FAR CLAUSES \nFAR 52.213-4: 52.213-4 Terms and Conditions-Simplified Acquisitions (Other \nThan Commercial Items). ATTACHED BY REFERENCE \n52.222-6 CONSTRUCTION WAGE RATE REQUIREMENTS \n52.236-2 DIFFERING SITE CONDITIONS (APRIL 1984) \n52.236-3 SITE INVESTIGATION AND CONDITIONS AFFECTING THE WORK (APRIL 1984) \n52.236-27 SITE VISIT (CONSTRUCTION) {FEB 1995) \nWork hours: Monday through Friday, 0730 – 1800 (7:30 am – 6 pm) No weekends or Holidays authorized. \n\n See attached applicable FAR Clauses by reference. \nOfferors may obtain full text version of these clauses electronically at: www.arnet.gov/far \nThe following Homeland Security Acquisition Regulations (HSAR) are incorporated as addenda to this \nsolicitation: HSAR 3052.209-70 Prohibition on Contracts with Corporate Expatriates (Jun 2006); \nContracting Officers Technical Representative (Dec 2003) (COTR) HSAR 3052.237-72. Copies of HSAR \n\n Vendors providing an offer must be registered in SAM (System for Award Management) \nprior to close of this solicitation. https://www.sam.gov/portal/public/SAM/. The vendors \nSAM registration must be in an “ACTIVE” status prior to award. \n \n"}

What to check before bidding

• Located in United States.
• Source notice 91f2507b877d489abc6dcd49d707df2c on SAM.gov.
• Notice published 20 Feb 2026; Tenqual indexed it 22 Feb 2026.
• Deadline listed as 9 Mar 2026.
• 2 tender documents identified.
• Create a free tender alert to catch similar opportunities before the deadline pressure starts.